Stable Transmission Mining Chute Feeder For Convey Mineral Lump

Stable Transmission Mining Feeder Chute Feeder

Quick Detail:

1. Stable transmission; high working efficiency

2. Compact structure; reasonable design

3. Good quality; widely used

Description:

The chute feeder can be installed on the ground or hoisted on the discharge port of ore bin. The chute bottom plates do the reciprocating movement. Stroke can be adjusted by the eccentric wheel; the eccentric throw is half as big as the stroke. According to experience of some mine sites, the eccentric throw should be no less than 30mm for cohesive ore. The chute width is 2-2.5 times bigger than the maximum feeding granularity. The biggest chute feeder can supply ore with granularity less than 500mm.

Applications:

The chute Feeder is used to convey mineral lump from storage silo to equipment in industries like smelting, mining, chemical, building material, concentrating and coal, etc.

Principle:

The machine is usually installed underneath the discharging opening of ore bin. Minerals fall on the bushing. The bushing is located at the chute bottom, configured on idler wheel and via eccentric device connected with reducer which is linked to electric motor by coupler. When it works, electric motor drives reducer via coupler; eccentric disk and drain cap which is situated between chute frame bottom and roller begin to do reciprocal and linear motion so as to uniformly feed minerals.

Specifications :